Europa Technology
Jupiter Scientific's Europa Dry Scrubber is a point-of-use facility exhaust treatment system with a broadJupiter Scientific's Europa Dry Scrubber range of process gas scrubbing capability. The Europa scrubber employs Jupiter Scientific's Europa Scrubbing Canisters to offer the lowest emissions of any scrubber available today. In all cases where the Europa is employed it offers guaranteed scrubbing of the target gases to levels below Threshold Limit Values.
The Europa operates in a totally passive mode at ambient temperature . Dry chemical resins efficiently react on contact with process gases and by products, converting them to non-volatile solids. Advanced scrubbing capabilities, combined with multiple levels of safety engineering, make the Europa one of the safest and most efficient scrubbers available.
The Europa System
- Canister/Wall Mounted Monitoring Box or Cabinet Designs
- 90% and Outlet Concentration Exhaust Gas Monitoring
- Real Time Exhaust Concentration Data Logging
- Interlocks to ensure Europa is operating within Specifications
- Visual and Audible Alarms
- Integrated Temperature Monitoring
- Integrated Pressure Monitoring
- Interlocks to Prevent Reactor Operation when Europa is Offline
Catastrophic Release Scrubbers
A Catastrophic Release Scrubber is installed in the gas cabinet or fume hood exhaust line, and is designed to capture a full cylinder's release of the target gas that resides in the gas cabinet. This cost effective scrubber uses a dry bed ambient media and requires no fuel or water to operate. Its purpose is to provide a safe abatement solution should a hazardous gas cylinder develop a leaking cylinder valve or should a situation occur in the gas cabinet which causes a leak that cannot be shut off.
Facilities Specifications
- Process Connections NW160 Flange
- Compressed Gas - Nitrogen 60 - 80 psig (5.5 bar)
- 3/8" compression fitting
- 1/4" compression fitting
- Electrical Supply 110/220 VAC, 50/60 Hz
- Overall Dimension (in): 56 H X 41.7 W X 41.7 D
- * Purge Nitrogen & CDA is used only when replacing
- the canister
Performance Specifications
- Exhaust Flow per System 500 SCFM
- Removal Efficiency Sub TLV Emissions
- Purge Gas - Nitrogen 25 SCFM*
- Pneumatics - Nitrogen 500 sccms
- Clean Dry Air (CDA) 10 SCFH (For Air Ox.)*
